Yes we can definitely help set you up. For replacement pins you will need the # RM-910008-00.This is the 3/4" diameter pins and they will be compatible with your Roadmaster Falcon 5200 Tow Bar.
You will also need a base plate to go on the front of the towed vehicle. I see you were searching for parts for a 2004 Dodge Dakota. If this is the vehicle you plan to flat tow, I recommend the # 266-1 for 4 wheel drive models, or the # 271-1 for 2 wheel drive models. You will also need the quick... view full answer...
Based on the instructions and our installation videos it appears as though the SumoSprings # SSR-106-47-1 and the Air Lift LoadLifter 5000Air Lift LoadLifter 5000 # AL57131 would not interfere with each other. However, we have not attempted to install them together and the manufacturer cannot confirm that they will fit at the same time.
I can confirm that they use different mounting holes. The SumoSprings install on the leaf spring stack in front of the axle while the air springs install... view full answer...
The Hengs 311 is a white silicone based self leveling sealant. For a white self leveling sealant the part # AL98KV would be a really great replacement. view full answer...
Try improving the connection of the main ground wire of the trailer wiring harness. Make sure it is attached to a clean metal surface. Or you can run all of the trailer wires back to the main ground. This is actually the ideal solution. But you can also check the current grounds for the lights to make sure they are making a solid connection to a clean metal surface. The pins of the trailer wiring connectors should be checked an clean as needed too.
What you described is the classic insufficient... view full answer...
We do not carry the Coleman brand of AC units so we aren't able to get replacement parts. Only option we have would be a replacement AC unit like the Advent Air # ACCOL135 which was designed to replace Coleman units like you have. The wiring plugs right in using the same type of connector so the install is simple and it allows you to use your current thermostat and controls as well. view full answer...
For your 2005 Winnebago Minnie, I recommend checking out the Swagman Original RV Bike Rack for 3 Bikes # S64152-2.
This bike rack is compatible with RV's, can handle up to 3 bikes weighing 35-lbs each, and will also work with 2" trailer hitches. view full answer...
Yes, the Greystone Built-in Microwave Oven with Trim Kit # 324-000105 consists of a black 900-watt microwave oven with a 0.9-cubic-foot internal volume and a rotating glass turntable along with a cosmetic trim-kit to complete installation in an RV.
The oven's overall dimensions are 23-3/8 wide x 15 tall x 13-1/2-inches deep and it weighs 34-lbs.
You can refer to the linked product review video to see more details on this RV microwave. We also offer this item in stainless steel as part... view full answer...
The Denver Mattress Supreme Hybrid RV Mattress has the radius edges you seek and is offered as a King - part # DE47RR (80L x 76W), this is currently the only radius edge option we offer at this time:
King - part # DE47RR (80L x 76W) view full answer...
The Stromberg Carlson RV Exterior Ladder part # LA-401 is an excellent exterior ladder option for motorhomes. It measures 99-1/2" tall but can trim this to fit your specific application. Please note, the standoffs will need to be attached to the RV's blocking or subframe. If you need an extension we do offer one for this ladder, the Stromberg Carlson RV Ladder Extension part # LA-148. view full answer...
The Curt Class 5 Universal Weld-on Hitch part # C87CR is designed to be welded to the frame of a vehicle. I cannot recommend bolting and drilling unfortunately. The frame will need to be clean and clear of obstructions before welding. In regards to the actual welding, this would need to be done by a trainer professional, make sure precautions are taken such as unhooking the battery. That said, I'm no welding expert so you would need to refer one for these types of questions. view full answer...
There was little info about that specific inverter I could find, other than it is a 130 watt inverter. The closest we have to that is a 200 watt pure sine wave inverter, the Go Power Industrial Pure Sine Wave Inverter - 200 Watt - 12V # 34282690.
This unit is 7-7/16" long x 5-15/16" wide x 2-11/16" tall, which should allow it to fit the same space as your current inverter. view full answer...